Bad Penny Pinball

@badpenny.mn

46 Followers 33 Following

The formerly biggest pinball location in Minnesota. The building was closed in August 2025.

Found an arcade lock bezel in place of a coil stop spring washer. It works in a pinch, but I wouldn't recommend.
The front logo runs down the left side of the t-shirt. The image depicts a graphic of the words "Bad Penny Pinabll"
Two Star Trek pinball machines in shipping position. The legs have been removed and the head is wrapped and the machine is vertical, sitting on the skids.
A partially disassembled playfield for The Walking Dead 2014 pinball machine.
A pinball tramp being repaired with blue tape holding it together and a dirty towel to protect the playfield
A micro switch with two wires. One of the wires is broken off and dangling.
Important Bad Penny announcement logo
A brand new shiny change machine in front of a black wall covered with graffiti in a basement
A quarters change machine disassembled in two parts waiting to be installed on a concrete floor in a basement. There is graffiti all over the walls and it looks like punk rock. There is a tool bag sitting on a table next to it.
Laptop with a USB EPROM burner attached.
Nine photos in a collage that show how to make a custom plastic protector for the King Kong pinball machine.
A new in box pinball machine sitting on a shipping pallet on a concrete floor in the middle of a large building filled with pinball machines
View inside a pinball machine cabinet with the playfield lifted in the service position.
An 8" subwoofer with chrome body attached to a fat magnet. Looking down in to the cabinet of a pinball machine.
An ai generated picture of a retro action figure blister pack, with a normal looking dude with dread locks, and his accessories, two silver balls and a mini tool bag. The hanging blister pack is decorated with neon arcade art and has words like "Multiball mode activated" and "Special When Lit"
Two pinball machines in the back of a pickup truck, folded up and wrapped with plastic and ready for transport.
Closeup of a circuit board with surface mounted LED chips
An old beater Ford pickup truck with the door hanging open in a snowy wilderness.
BlazeCut fire suppression tube zip tied to a sheet of metal -- the cover for a 3d printer enclosure.
Top side view of Anarchy PCB Ribbon Cable Tester
Top view of the Bad Cats - Fish Bone-us vari target opto assembly.
New in box pinball machine in the back of a pickup truck
The back side of a printed circuit board showing recent work of fresh rows of soldered pads
The screw ripped through the tee nut.
Meow meowmeow meow