anabolic_cthonic

@indenturedexistence.net

433 Followers 1891 Following

maker. gamer. he/him. friends with l'esprit d'escalier. spooning the abyss. interested in sweets & filament with dangerous auras. "love isn't going to save us. it's what we have to save." teaching myself what i can.

Parasite Eve for the PlayStation 1 An animated female characters face is obscured partially by the PlayStation logo. The text 'parasite eve' with a stylized PE in the upper right corner and the old 'Squaresoft' logo in the lower right corner
A photo of a 3D printed fence post 'topper'. The topper itself is of a gnome (like World of Warcraft) and the photo is taken of the gnomes backside. There are several pale green frills of much like you find growing on trees, the largest about the size of a pea and about a half dozen growths in total. The gnome was printed in a grey colored filament with particulate sparkles in the filament. The gnome was printed with a 0.8mm nozzle and the layer lines are apparent with a noticeable z-seam. The base of the topper is brown and has started to warp subtlety from the sun. There is a garage and trees visible in the background, out of focus.
A dialog box from KDE Plasma titled "Warning" informing the user with a yellow exclamation mark symbol that "You need root permissions to run the driver."
a close-up photo of an STM32F103 MCU. The shot is focused on the side of the board where the micro USB plug would be; however this micro USB plus is missing! The pads are visible, along with some solder balls from solder paste. Also visible are a set of jumpers with the 'BOOT0' silkscreen, a button with a 'RESRT' silkscreen and the STM32 silkscreen.
The album cover for Blue Wonder Power Milk by Hooverphonic. The photograph on the cover of the album is of the interior of the Atomium in Brussels.
My dog Cassie wearing a pink and white stripe jacket with green fairy lights.
A photo of myself in a black hoodie wearing a 3D printed face mask of the Grinch. I'm seated in front of green-blue striped curtains that are drawn and next to a bookshelf with a tackle box and books visible.
A photo of a 3d printer, paused mid print. In the lower center is the test print, with four colors printed (dark green, light green, purple and blue). Behind and to the right of the test print is the wipe tower with the four above colors visible.
A Northern Green Frog spotted in the garden. The frog is sitting on top of some mulch next to a stone wall. In the foreground there are pink-purple flowers visible.
a screenshot of the Minder program, a 'mind-mapping' tool. It shows a branching tree, each branch a different color. The main branches are MOVE, PRINT, SERVO, STATUS, and SYS. The sub branches for MOVE are FILAMENT and SELECTOR. FILAMENT is for feeding and retracting filament to and fro. SELECTOR has entries for homing the selector and moving to different gates. The sub-branch PRINT has entries for pre-flight/pre-print checks (selector is homed, make sure the gates are loaded & the number of loaded gates equals the filament number in the print file) The sub-branch SERVO has macros for opening and closing the filament cutter and engaging and releasing the filament top-hat servo. The sub-branch STATUS will ultimately have a macro to check which gates are loaded, as well as macros to check filament loading performance. The sub-branch SYS has macros to reassign the filament monitor as a simple trigger during filament moves.
A picture of my dog, Cassie. She's a golden silky terrier (I think). She's sitting in a black office chair and her tongue is sticking out of the side of her mouth.
A partially assembled linear rail block
a screenshot from a personal weather station on Weather Underground. Station Summary Online - Updated 31 seconds ago Current Conditions 92.3F Feels like 115.8F (a simple compass indicating SSW) Wind & Gust - 3.0 / -- mph Dewpoint - 55.8F Precip Rate - 0.00 in/hr Pressure - 28.61 in Humidity - 73% Precip Accum -- UV --
A photo of a 3d printer calibration cube, mid print. The cube is a dark purple color. The tool head of the printer is visible along with the inductive probe mount in red. There is a visible, horizontal,print artifact in the side of the print where input shaping was disabled. the transition is distinct; corners appear slightly sharper and there is ringing that appears as ripples along the features of the print.
A BME280 temperature-baronetric pressure-humidity sensor with custom cable. The cable has black, woven nylon jacket with red heat shrink. The cable has 6 wires,with a jst-ph plug in one end and individual Dupont plugs in the other end.
An Xbox controller, the right half of a Dygma Raise keyboard and my right hand holding an Elecom Huge trackball. The hand is wearing a grey, fingerless, compression glove.
A sunset; the treeline is in silhouette and the sun is a dark red disc sitting just above.
My dog, Cassie, sleeping on a raised dog bed. The dog bed is on gravel and there are pansies and other plants growing out of the ground around the dog bed.
A photo of a rosy maple moth that landed on my door frame. The moth has yellow and pink wings, with a tuft of yellow hair on the thorax and pink legs; ~20mm long
Kryten, Cat, Lister and Rimmer. The cast of Red Dwarf.
The zaribo test cube printed in ePA6-CF (Nylon 6 with carbon fiber).
Second layer of a 3D print. There are 5 pieces in the picture. The toolhead is also visible, albeit blurry due to the motion. There is subtle rippling in the second layer visible on the two left pieces due to the nozzle being too close to the bed. Refraction from the interior overhead LED lighting highlights the extrusion lines in two pieces on the right. There is a prime line visible in the lower left corner of the image.
A partial first layer of a 3D print. The filament is dark green in color. The physical print is 8 sided. The individual extrusion lines are barely visible. The red and black printed parts of the tool head are also visible in the image.
the image is of a "gaming" -style computer mouse with a skeletonized body. the mouse is depicted from it's left-hand side. there is an object in the interior of the mouse that is glowing orange; the glow casts light on the interior of the mouse shell reminiscent of an internal combustion engine. there are back & forward mouse buttons on the side of the mouse and a long rounded rectangular button that appears to be the left-mouse button.
A photo of my dog, Cassie, a silky terrier, wearing a hot pink hoodie. Cassie's tongue is sticking out of the side of her mouth.
an unfinished SpotMicro32 robit.
ANTI-CAPITALIST AFFIRMATIONS - i am allowed to spend my time creating things, even if they are not beautiful. - there is no such thing as a "real job". all forms of work are real and valid. - there is nothing that i need to accomplish to be worthy. i am already worthy. - doing nothing is good for my soul. - i am not defined by what I produce. - my worth cannot be measured by my paycheck, my job title, or a list of professional or academic achievements. - i do not need to monetize my hobbles, it is enough to spend time doing something i love. - i will not let society decide what success looks like. i can define what successful life looks like for me.
My dog, Cassie, lying on her back. She is looking at the camera and her tongue is sticking out. My hand is visible in the camera
Superlight Toolhead by MFBS on a RatRig V-core 3.1. The printed parts of the toolhead are a bright purple and red.
The Superlight Toolhead by MFBS on a Rating V-core 3.1 3-D printer. Most of the printed parts are bright red, with the combo back plate/tool board mount a bright purple
A frog, clinging to the pane of glass. There are closed blinds behind the glass.
UI elements in the recent Discord redesign that do not line up
A photo of the northern lights. There is a telephone pole and power lines visible, as well as the side of a house and some bare trees. The northern lights are pink with a hint of green towards the horizon.
A photo of the character Malcolm Tucker from the BBC political satire 'The Thick of It' played by Peter Capaldi.
a screenshot of a height map generated for a 3D printer. There is a color scale to the right of the height map with red at +0.16 and blue at -0.16 height difference. the height map is a green field with some spots of yellow. the upper left corner is blue, indicating lower-than-average and a single point in the upper right is red, indicating very high. The statistics box displays the following information: Number of points: 400 Probe area: 728.9 cm² Maximum deviations: -0.076 / 0.160 mm Mean error: 0.022 mm RMS error: 0.027 mm Below are buttons for managing the display of the height-map; changing the colors from terrain (blue-to-red) or heat (green-to-red) as well as displaying the map fixed, or it's deviations. The buttons for 'terrain' and 'deviation' are selected.
A CoreXY 3d printer; the carriage is printed in bright red and purple parts. The printer is printing bright green circles. The background of the has been filtered out-of-focus.
The moon, with the first slivers of silver moon showing
The moon, ending totality
The moon, exiting totality.
The moon in half shadow, as seen the morning of March 14, 2025
The moon in partial shadow, as seen the morning of March 14, 2025
The Y-face of a 3D printed 'calibration cube' in pink filament showing significant ringing artifacts on the printed surface that appears as multiple ripples around an inset Y character along the vertical face of the print.
a screenshot from the Steam Game PLAYNE showing 1,001 meditations completed.
an infographic outlining the steps to "reverse" a swastika that can't be removed and turn it into the text "love wins" the infographic ends with "hooray :D you just did a crime!" since there may be a possibility you're defacing someone else's property.
The printing area of CoreXY 3d printer, showing a 4x4 grid of filament blobs, the result of an extrusion volumetric flow test.
A dot matrix LED highway traffic sign with the text "Reminder: People who show you new music are important"