JC

@jctv.bsky.social

162 Followers 410 Following

Music producer, figure painter, sim racer. 🇦🇺 / He/him / 🚫 No Gen-AI; No-AI-Training: True.

A photo collage showing hand-painted, resin printed models of 2B (Nier Automata, sculpted by ESM) and Igga the Tamer (Solgood studios).
Photo of mechanical hand on resin printed bust of Gustave from Expedition 33. Finger 1 and 2 are missing.
Photo of resin printed bust of Gustave from Expedition 33.
Photo of 1/6 scale resin printed model of 2B from Nier Automata. The model is handpainted. She holds her right hand to her face, holding a removed blindfold. Her left hand holds sword.
Photo of various Vallejo brand paints. They span the ROYGBP spectrum. Some other paints are visible too like varnishes and silver.
Photo of desk used for painting. The table top is a light wood colour and the back of the desk has a tall white peg board. Various accessories are visible including paints, brushes, wash stations, and a green desk mat.
Close-up torso and head of resin printed 1/6 scale model of 2B from Nier Automata. She looks sideways at the camera and holds a blindfold in her right hand.
Photo of resin printed female fantasy character bust. The character has red and brown hair, and a tribal type outfit consisting of lots of colourful necklaces, and a brown/green tank top. She has blue metallic make up sprayed in her eyes and a pink lipstick. She is styled similarly to Aloy from Horizon Zero Dawn.
Photo of base from resin printed 1/6 scale model of 2B from Nier Automata. The base has mechanical debris and rubble, and 3 small tufts of green grass.
Front and back photos of resin printed model of 2B from Nier Automata at 1/6 scale. She wears her signature leotard, and holds her sword behind her back in her left hand, and her removed blind fold in right hand.
Photo of resin printed base from 1/6 scale model of 2B from Nier Automata. This photo highlights metal debris painted with rust and yellow/black warning markings.
Photo of resin printed base from 1/6 scale model of 2B from Nier Automata. Visible is the base covered in rocks and sands, and bright silver metal-looking debris.
Photo of 3d printed base for 1/6 scale statue of 2B from Nier Automata. The base is covered in stones, sand, debris, and a white layer of glue.
Photo of 2 spare gunpla pieces, intentionally damaged to look like mechanical debris.
Photo of painted head piece from a resin printed 1/6 scale model of 2B from Nier. Her face is fully painted, and she has a grey bob hair cut. She is not wearing an eye mask.
Photo of a filament 3d printed round 15cm base for a statue, inside a spray booth. The base is painted with black primer on the edges.
Photo of 2 resin printed faces from 1/6 scale model of 2B from Nier Automata. Her skin is a pale tone, with eyes showing white sclera and tidy black eye liner. She has blue eye shadow and blue irises.
Photo of resin printed face from 1/6 scale model of 2B from Nier Automata. Her skin is a pale tone, with eyes showing white sclera and messy black eye liner.
Photo of chest and arms from 3d resin printed model of 2B from Nier Automata 1/6 scale. Her clothes are predominantly black, with a cut out window over her bust. The sleeves of her top are cuffed in black feathers.
Photo of upper arm pieces from resin printed 1/6 scale model of 2B from Nier Automata. The sleeves are puffy and painted black, with black and grey feathers adding detail around the cuffs.
Photo of 2 resin printed head/face pieces from a 1/6 scale model of 2B from Nier Automata. The skin tone is very pale, with purple and red tinted shadows for dramatic effect.
Photo of head pieces from resin printed 1/6 scale model of 2B from Nier Automata. The pieces are sprayed red and purple, to give depth to future layers of skin tone colours.
Photo of front of torso piece from resin printed 1/6 scale model of 2B from Nier Automata. Visible is black fabric, dark green details, and white stitching.
Photo of torso piece from resin printed 1/6 scale model of 2B from Nier Automata. The front of the torso is visible, showing a black top, with green/brown panels of detailing.
Photo of torsa piece from resin printed 1/6 scale model of 2B from Nier Automata. Her top is black with detailed panels of brown.
Photo of head pieces from resin printed 1/6 scale model of 2B from Nier Automata. The pieces are grey because they have been stripped of paint.
Photo of resin printed sword blade from 1/6 scale model of 2B from Nier Automata. The blade is a dirty, off-white colour.
Photo of face/head piece from resin printed 1/6 scale model of 2B from Nier. Visible is a patch of discoloration on her cheek where the paint has been accidentally removed.
Photo of face/head piece from resin printed 1/6 scale model of 2B from Nier. The details include glossy pink lips, and glossy blue eyes.
Photo of 2 identical head/face pieces from a 1/6 scale resin printed model of 2B from Nier Automata. The key painted features are glossy pink lips, and glossy blue eyes.
Photo of resin printed head/face piece from a 1/6 scale model of 2B from Nier Automata. The lips are finished with a preliminary paint job of soft pink and red creases.
Photo of resin printed head/face piece from a 1/6 scale model of 2B from Nier Automata. The eyes are white, with a suggestion of an iris and pupil in faint black paint.
Photo of 2 resin printed faces from 1/6 scale model of 2B from Nier Automata. The face has no painted features.
Photo of torso piece of a resin printed 1/6 scale model of 2B from Nier Automata. Her torso is clothed in tight black, with a window of bare flesh on her chest.
Photo of resin printed 3D Printable Moo Deng the Bloodthirsthy by Marchen Atelier. Hand-painted by @JCTV.bsky.social
Photo of a resin printed 1/6 scale model of the sword handle from 2B from Nier Automata. The handle is painted a dirty off white colour, with silver highlights.
Photo of the torso piece from resin printed 1/6 scale model of 2B from Nier Automata. Visible is black masking putty, wrapping the model, leaving only chest skin tone exposed.
Photo of the front of the torso piece from resin printed 1/6 scale model of 2B from Nier Automata.
Photo of the torso piece of a resin printed 1/6 scale model of 2B from Nier Automata. The piece is all black, with exception of a cut-out of bare skin on her chest.
Photo of a boot piece from a resin printed 1/6 scale model of 2B from Nier Automata. Visible are the laces behind her knees. Her boots are thigh high, and mostly a black leather finish.
Photo showing the torso of 1/6 scale resin printed model of 2B from Nier Automata. The top is covered in oversprayed skin tone colour. Putty can be seen masking the window in the front of her top.
Photo showing legs from a 1/6 scale resin printed model of 2B from Nier Automata. Visible is black putty, used to cover her boots to protect during painting.
Photo of the leg piece from a resin printed 1/6 scale model of 2B from Nier Automata. Visible is a black garter band on top of her stockings on her thigh, with a visible red band where her thigh meets her boots, due to a mistake in the paint work.
A photograph of a tin of AK Camouflage Elastic Putty.
Photo showing pieces of a 1/6 scale resin printed model of 2B from Nier Automata. Visible is her face and the back of her top, sprayed with pale skin tone.
Photo showing a hair piece from a 1/6 scale resin printed model of 2B from Nier Automata. The piece is the rear of her head and hair. Visible is a black coloured headband with a visible scuffed leather look.
Hair pieces of a 1/6 scale resin printed model of 2B from Nier Automata, showing white hair with a dirty finish.
Photo showing the hair pieces of a 1/6 scale resin printed model of 2B from Nier Automata. The hair is painted in rough grey and white colours.
The head and face piece of a resin printed 1/6 scale model of 2B from Nier Automata. She is painted in high contrast skin tones.
Photo showing a resin 3d printed 1/6 scale head and face, from a model of 2B from Nier Automata. The head is painted in fair skin tones, with shadows and highlights accentuated by use of paints.
A photo of all individual pieces of a 1/6 scale resin printed model of 2B from Nier Automata. The pieces are sitting in a glass dish after washing. Also visible is a paint brush and a battery powered rotary tool.
A photo of pieces of a resin printed 1/6 scale model of 2B from Nier Automata. The pieces in focus are the face and head pieces, which are a light skin colour.
A photo showing multiple pieces of a resin printed 1/6 scale model of 2B from Nier Automata. The visible pieces include her face and hips, which are painted in a light skin tone.
Photo of pieces of a resin printed 1 / 6 scale statue of 2B from Nier Automata. The main subject of the photo is her face and head piece, which is seen with red highlights and purple shadows.
A photo showing pieces of a 1/6 scale resin printed model of 2B from Nier Automata. The main visible pieces are 2 identical copies of the statues head, with these brush pieces painted in messy terracotta and skin tones.
A photo taken showing inside the inside of a photo box, which contains an air brush sitting in an air brush holder, and a bottle of matt varnish.
Photo of resin printed 1/6 scale leotard piece of 2b from nier automata. The leotard is painted white, with ornate silver highlights around the waist.