Kaptaran

@kaptaran.bsky.social

106 Followers 328 Following

Some guy on the internet trying to be mindful of everyone in the pool. Current obsession: Daggerheart

Merriam-Webster says my word of the year is "smol", and I'm not happy about it.
Close up shop of custom 3d printed game pieces for Ticket to Ride in orange, red, and green player colors
Completed 4 player Ticket to Ride game with 4 players using custom 4d printed trains in green, blue, orange, and red. The game is on a large train themed 3d printed table topper
Stagetop 3d printed table broken down to 4 panels of 2x3 tiles each, 15 8" square playtiles, and everything else in 2 12" cube soft storage boxes
3d printed atagetop table with the ticket to Ride legacy map face down on top. The draw pile is on the left of the board, and the yellow car is set up holding cards and train cars
Completed stagetop game table surrounded with train themed rails there a two cars of each color: red, orange, yellow, green, blue, and purple. One car for each color is a card holder and the other a component holder. There are 4 white cars, one on each side, and the corners are train stations in blue red orange and green
Top down view of the 3d printed table almost complete assembled except for 5 rail pieces
Rails 3/4 of the way around the stagetop 3d printed game table moments before realizing the stacked up playtiles should have been attached first
A pile of stagetop tiles lock clips in purple and maroon with which to attach the station themed rails to the core table
"Station" themed rails and playtiles stacked on top of the stagetop frame. The rails are in a near rainbow of colors (purple instead of indigo and violet)
Top down view of the stagetop game table brightside up but without rails or play surface
2 stagetop "station" themed legs, one purple or one yellow with concrete looking segments at the top and bottom. Between the concrete is modeled to look like iron girders
Orange and purple stagetop brace clips laid out on the underside of the table base. The braces are lined up, revealing 8 missing braces
4 stagetop base clips in a square with 4 braces connecting them
The 3d printed screwbdriver for stagetop inserted into a brace clip and screw
Brace clips for stagetop game table topper in 2 parts. The clip which braces will slide into, and a screw that holds it to the base tile
The underside of a 4x6 layout of stagetop tiles all clipped together with maroon clips, except for a row and column of purple that decides the tiles into 4 2x3 tiles
The top of a stagetop base tile with 4 clips screwed into place through the bottom
Stagetop table topper with a woefully behind advent calendar jigsaw puzzle and advent calendar Exit game
Stagetop 3d printed table customized for Daggerheart Also featuring 3d printed terrain, miniatures and accessories like dice towers and card storage
YouTube recap featuring the excellent "DodoBorne: A Daggerheart Actual Play Podcast" in the 4th slot.
Screen capture of YouTube recap declaring me "Most likely to build a 3d printed game table and then host a D&D marathon"
cover art for Ridge Racer for the original PlayStation
3d printed player dashboard for Daggerheart with slots for armor, hitpoint, hope, and stress tokens. Inserts with which to write semi permanent information do not quite fit in their intended spaces.
Top down view of a Battlestar for daggerheart where 2 players have just been ambushed
Daggerheart setup with 3d printed game table topper
A bottle of orange fanta from the coca-cola company
A screen capture of Raul Julia as Gomez Adams in The Adams Family. Gomez slumps in a chair looking defeated while Thing massages his head
3d printed miniatures representing the Sablewood Messengers from the Daggerheart quick start adventure. Left to right, Varian Soto, Khari Nix, Garrick Reed, Marlowe Fairwind, and Barnicle
4 of the 5 Sablewood Messengers from the Daggerheart quickstart adventure. Varian, Khari, Marlowe, and Barnacle represented in color 3d printed miniatures.
1/2 of the Sablewood Messengers from the Daggerheart quickstart adventure represented as 3d printed miniatures. Barnacle and Varian are complete, while Garrick is absent. Khari is only printed from the shoulders down, and Marlowe is printed from shoulders up with her left arm raised casting a spell (printed with translucent filament)
Six 3d printed miniatures for Daggerheart. 1 is a representation of Varian Soto (a catlike humanoid with orange skin wearing gray armor). Varian has 5 identical miniatures representing Barnical (a frog like humanoid with blue skin wearing a gray pointed cap and clothing). Both Barnacle and Varian are playable characters in the Daggerheart quickstart adventure
5 identical upside down 3d models printed in gray and blue. Frog feet can be seen on each, and they are still attached to build plate.
3d printed models of a Kitari (cat person) ranger for Daggerheart. One stands completely assembled with orange hands, feet, and head on a grey armored body. It is surrounded by grey, orange, and green bases. Another stands behind an orange head that has not yet been attached to it.
The outside of a red 3d printed book shaped storage box with the daggerheart logo raised on the front
A pile of colorful ball cap style hats from places I have visited on top of a table with a scrabble board themed tablecloth
A picture of the standard Daggerheart rulebook and playing cards, the Critical Role 10th anniversary oversized duality dice, some 3d printed tokens and a 3d printed GM screen
A black 4-panel 3d printed GM screen with the Daggerheart logo in gold and blue on each panel
A large 3d printed modular model of a fantasy gallon with 3 masts and six sails. For scale, a miniatur of a goblin wearing an admirals hat stands behind the (tiller? Stearing wheel? I don't actually know much about boats!)
4 3d printed miniatures for Daggerheart each printed with 4 colors. The druid is primarily green, the warrior purple, the ranger red, and the wizard blue
2 Bambu Labs 3d printers on a table. On the left, the P1S model with AMS on top which is significantly larger than the A1 Mini with AMS lite to the right
The post card rewards from the EXIT brand escape room themed advent calendar. One exclaims "I saved Christmas" while the other has the cover art with a glowing golden book and a quaint winter village
Uscpsb account stating the only logical conclusion is they are not posting enough. A Star Trek minus context post below with Mr Spock, which implies endorsement of their conclusion
A close up of my nice new "I Voted Today" sticker
Inside of a 3d printed circular room for a tabletop role playing game. A translucent pyramid in the center glows purple, lighting the rest of the room
A 3d printed tower with external spiral staircase and translucent glowing windows. The table is similarly lit with LED lights, and there are several 7npainted 3d printed miniatures scattered around the table.
Car radio display with the wrong album displayed for the track playing.
Bart Simpson on a t-shirt stuck in the rear end of a larger person. The title is "Crack kills"
A messy table with a complete Christmas themed jigsaw puzzle, and a partially destroyed box for an Exit brand advent calendar
3 smooth collies laying down hoping for a treat