MAG Laboratory

@maglaboratory.org

13 Followers 29 Following

Makers Artists and Gadgeteers Laboratory is a community run makerspace in Walnut, California. We are a 501(c)(3) non-profit organization.

three milling features of varying depths to test the capabilities of the CNC mini mill. Each feature was milled using a 1/4" end mill (12.7mm).
Brandon's inverter decoder board with isolated RS485 communications interface and switching regulator
Brother laser printer with a gold MAGLab sticker on it
sovol sv08 with half-built enclosure
grassy hills with the valley in between filled with a freeway interchange
Dead blow hammer with "for rectal use only" sticker
successfully decoded inverter data battery voltage: 52.75 output voltage 120 wattage: 75
Green circuit board populated with components. There is a JST-XH surface mount male connector on the left. There are four SO-23 components on the left. In the middle is a mysterious "CO2" detector. There are also two LDOs in the middle with the bottom one being replaced with a deadbugged SO-89. There are two TSSOP packages on the board. One presumably MCU device on the right and one LCD driver on the bottom.
A din box containing two breakers and two mystery devices. The two device classes are interlaced starting with a breaker from the left. The first mystery device is @kirisaki.moe.observer 's HMI and the second is a fused solid state relay.
a pencil sharpener supposedly attempting to sharpen a drill bit (this is a joke)
Laser etched bamboo keychain The laser etchings are the following from top to bottom: MAGLab logo Text: MAKERS ARTISTS GADGETEERS LABORATORY Website QR code The laser etched bamboo keychain is sitting on a coarse fabric oriented at 45 degrees and with a simple weave that has gray and white fibers
An ikea rast 3-drawer dresser that is mostly stained black with the exception of one drawer which is stained a more traditional brown with black it is surrounded on the left with an orange bucket sitting on top of a translucent white bucket. on the right is the leg of a table which is painted a cool gray color
J35A4 bank 2 (front) from a Honda Odyssey showing both rocker shafts (intake is on top, exhaust is on bottom) and the VTEC rocker the spark plug tubes are plugged with paper towels to help prevent debris from ending up in the combustion chambers
Assembled Ikea dresser with one drawer stained a different color and missing the handles
Four wooden panels. Most are stained black. The third from the left is stained an bronze color.
"Weekly Meeting" sign in the style of "The Office" sign with one figure standing with a hacksaw and the other figure sitting at a desk.
QED print head on the CR-10S with an attached v6 knockoff and silicone sock. The QED parts are printed using translucent red with an orange hue. The Bowden tube from Capricorn is orange and black zip ties are used to secure the wiring loom to it. The 3d printer has grid patterned PEI on its flexible spring steel bed.
Stainless steel tag with the mag laboratory logo, website, and a qr code to the website laser fused in black
A canvas projector screen with the little totoro from my neighbor Totoro filled in with water balloon coloring
MAG Laboratory text and logo cork coaster sitting on a plastic wood pattern veneer table
Beaten wood samples surrounded by tools and drywall screws along with one can of wood stain
A "distressed" wooden crate with rope marks and bolt marks